Cheetah Stealth Series
NISSAN SR20DET
GT2871R-52T TURBOCHARGER UPGRADE

Nissan SR20DET 400 Plus Horsepower

Warning - Please Read!

After fitting a higher flowing turbocharger it is crucial the vehicle be dyno-tuned by a mechanic who is experienced with tuning turbocharged vehicles BEFORE putting your foot into it no matter how tempted you are to give it a quick squirt!

Air fuel ratio, timing, fuel flow, fuel pressure, inlet manifold vs exhaust manifold pressures etc., all need to be checked. The mechanic should set the boost at a safe level & determine what if any modifications are required to further increase boost!

Failure to have your vehicle dyno-tuned after major component modifications will insure an engine & consequential turbocharger failure!!!

 

 

ACCELERATION!  MUSCLE!  STEALTH!

Horsepower Rated 400+



Features
  • Direct Bolt-On
  • Dual Ball Bearing
  • Optional 3" Adaptor for Air Intake
  • Optional 3" V-Band Adaptor for Exhaust Out
  • Factory OEM Replacement by GARRETT
  • Actuator NOT Included



Compressor   Turbine
Inducer Ø:

51.2mm

  Wheel Ø: 53.8mm
Exducer Ø: 71.0mm   Trim: 76
Trim: 52   A/R: 0.64 / 0.86
A/R: 0.60   Wastegated: Yes



Note


Actuator is not supplied with this unit, you can re-use the original actuator or select a higher pressure optional actuator & bracket below.


P/N: C-GT2871-SR20DET
 

Specify Turbine Housing A/R


Free Delivery Australia Wide

Divider

RELATED ITEMS
 
Oil Supply Low Profile with Braided Lines
GT Oil Supply Line Kit H-OSB-314K
  • Low Profile Oil Supply Line Kit - 14" 
 
 
H-OSB-322K
  • Low Profile Oil Supply Line Kit - 22"
 
 
H-OSB-332K
  • Low Profile Oil Supply Line Kit - 32" 
 
 
H-OSB-348K 
  • Low Profile Oil Supply Line Kit - 48" 
 
 
Oil Drain
 GT28R Oil Drain Gasket GOD-GT2535-01 
  • Oil Drain Gasket
  • *Inc. with Turbo
 
Air In-Out Options
Flange: Air Inlet - 2 Bolt to 2.50  FAI-2B-250 
  • Flange Compressor Inlet
  • 2 Bolt to 2½" Hose
  • CNC Machined Billet Aluminium
 
Flange: Air Inlet - 2b to 3.00  FAI-2B-300
  • Flange Compressor Inlet "Race"
  • 2 Bolt to 3" Hose
  • CNC Machined Billet Aluminium
 
Flange: Air Outlet - 3 Bolt to 2.00  FAO-3B-200
  • Flange Compressor Outlet
  • 3 Bolt to 2" Hose
  • CNC Machined Billet Aluminium
 
 
Water In-Out Option for Braided Lines
Banjo Kit 14mm x 1.5 pitch FBK-M1410
  • Banjo Fitting Kit: Suits -6 AN Fitting
  • (1) Banjo Fiting 14mm Hole, -6 AN Male Flare
  • (1) Banjo Bolt, 14mm x 1.5 pitch
  • (2) Crush Washers
 

Exhaust In

GT25, GT28 Turbine Base Gasket GT258U-01
  • GT25, GT28 Undivided Base Gasket - Stainless Steel
  • *Inc. with Turbo
 
Exhaust Out Options
Gasket: Exhaust Out - GT25 to GT30 S/S GEO-GT2530-5B
  • Gasket: 5 Bolt Exhaust Out - Stainless Steel
 
Flange Exhaust Outlet GT25R-GT30R Twin Port FEO-5B -GT2530TP 
  • 5 Bolt Flange Plate
  • CNC Machined Solid Billet Stainless Steel ½" Thick
  • Twin Exit Ports: 2¼" & 1½" 
 
 Flange: Exhaust Out - 5 Bolt GT25-GT30 FEO-5B-V2M 
  • 5 Bolt Flange Plate
  • CNC Machined Solid Billet Mild Steel
  • Grooved for 3" Oval Tube
 
 Flange: Exhaust Out - 5 Bolt GT25-GT30 FEO-5B-V2S
  • As Above - Stainless Steel
 
Flange Exhaust Outlet 5 Bolt to 3" V-Band  FEO-5B-V2KM
  • 5 Bolt to 3" V-Band Adaptor: "Race"
  • Flange Plate, 3" Tube, 3" V-Band, Tig Welding
  • Mating 3" V-Band Weld Ring - Mild Steel 
  • 3" V-Band Clamp - Stainless Steel
  • Studs (5) Locking Nuts (5)
 
FEO-5B-V2KS
  • As Above with Mating V-Band Ring in Stainless Steel
 
Actuators
Universal Actuator Bracket  ACT-050U 
  • Universal Actuator Bracket
  • CNC Machined 2 Bolt 
 
 
Universal Actuator 14PSI ACT-014U
  • Actuator for IWG Turbine Housing
  • 12-14 PSI
 
 
Universal Actuator 14PSI ACT-022U
  • Actuator for IWG Turbine Housing
  • 20-22 PSI 
 
 
         
         
         
 
*Applicable Garrett Part Numbers 
472560-5015S, 472560-5015, 472560-0015, 472560-15,
 

OEM Turbocharger Catalogues

Go to top