|
|
|
|
|
ALUMINIUM WELD FLANGE |
STEEL WELD FLANGE |
|
|
TiAL Model Q Blow-Off Valve
|
|
Features: |
|
- The body and all internal components are CNC-machined from 6061 aluminium alloy. It features a large 1.98 in (50.5mm) valve.
- The V-Band design aluminium mounting clamp gives a very clean and unique appearance. The clamp is anodized and uses Stainless Steel hardware for a long lasting, corrosion-free appearance.
- The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anodize-coated for wear resistance.
- The Blow Off Valve also comes with our own machined aluminium banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life.
- An aluminium or mild steel weld base mounting flange is furnished with each unit. The use of 6061 aluminium allows the housing to be anodized with a selection of colours.
- Through countless hours of R&D TiAL was able to make the same size valve flow a staggering 60% more than the original design - that means 60% more air is blown off per cycle! This is the highest flowing BOV on the market.
|
|
Model Q Optional Colours:
|
|
|
|