GT2871R
Ball Bearing Turbocharger

GT28RS Ball Bearing Turbo


Engine Displacement 1.8L - 3.0L

Features:

Dual Ball Bearing
Oil & Water Cooled
3" Compressor Inlet
2" Compressor Outlet
Internally Wastegated
T25 Turbine Flange
5 Bolt Turbine Outlet Flange
High Boost Actuator:12 PSI Minimum

Compressor	Turbine
Inducer Ø: 53.1mm Exducer Ø: 71.0mm Trim: 56 A/R: 0.60	Wheel Ø: 53.8mm Trim: 76 A/R: 0.86 Wastegated
Map	Map

	CA18DET UPGRADE Intercooler & Air Intake Pipes Req Mods
GARRETT P/N: 743347-0002

Compressor Cover Options

OPTION 1	OPTION 2	OPTION 3

GT28RS: .60 A/R "Default" 3" In / 2" Out More Compact Housing	GT28R: .60 A/R 2 Bolt In / 3 Bolt Out Nissan - SR20DET Bolt On	T04S: .70 A/R 4" In / 2½ Out Max Flow Actuator NOT Included

Turbine Housing Options

Option 1	Option 2	Option 3	Option 4

Garrett GT28 Flanged "Default" Internal Wastegate (IWG) Available in .64 or .86 A/R Garrett Default Housings Fits Nissan CA18DET & SR20DET	GT28 Flanged "Special" 44mm EWG Adaptor Available in .72 A/R T3 Flow Characteristics Fits Nissan CA18DET & SR20DET	GT28 Flanged "Plus" External Wastegate (EWG) Available in .63 or .82 A/R T3 Flow Characteristics 2½ V-Band	Dual V-Band Housing "Tial" External Wastegate (EWG) Available in .64 or .86 A/R Cast Stainless Steel Lightweight (Cost + $100)

P/N: GT2871R-56T

RELATED PARTS

Oil Supply
	H-OSB-314K	Low Profile Oil Supply Line Kit - 14"
	H-OSB-322K	Low Profile Oil Supply Line Kit - 22"
	H-OSB-332K	Low Profile Oil Supply Line Kit - 32"
	H-OSB-348K	Low Profile Oil Supply Line Kit - 48"
Oil Drain Options
	GOD-GT2535-01	Oil Drain Gasket (*Inc. with Turbo)
	FOD-GT2535-01	Oil Drain Flange: 1/2" NPT-F CNC Machined Billet Aluminium
	FOD-GT2535-05	Oil Drain Flange: Suits 5/8" Oil Hose CNC Machined Billet Aluminium - Straight
	FOD-GT2535-10	Oil Drain Flange: Suits 5/8" Oil Hose CNC Machined Billet Aluminium - 5° Tilt
Water In-Out Options
	FBK-M1405	Banjo Fitting Kit: Suits 3/8" Water Hose (1) Banjo Fiting 14mm Hole (1) Banjo Bolt, 14mm x 1.5 pitch (2) Crush Washers
	FBK-M1407	M14 Universal Water Kit M14 Banjo x ¼" NPT-F (1) M14 x 1.50 Banjo Bolt (1) M14 Copper Washers (2) Suitable for Barb or Flare Nut Fitting
	FBK-M1410	Banjo Fitting Kit: Suits -6 AN Fitting (1) Banjo Fiting 14mm Hole, -6 AN Male Flare (1) Banjo Bolt, 14mm x 1.5 pitch (2) Crush Washers
Exhaust In
	GT258U-01	GT25, GT28 Undivided Base Gasket - Stainless Steel (*Inc. with Turbo)
	FEI-GT258-005	GT28 Base Flange Undivided - Mild Steel CNC Machined WITH Tapped Holes 1/2" (12.7mm) Thick Helps Prevent Warpage
	FEI-GT258-015	As Above - Stainless Steel
Exhaust Out Options
	FVB-0253M	GT28 "Plus" 2½ or 3" V-Band Weld Flange Mild Steel Use 2 to adapt 2½" to 3" Exhaust Tube Also fits GT28R "Plus" Turbine Housing CNC Machined From Solid Billet Stock
	FVB-0253S	GT28 "Plus" As Above - Stainless Steel
	CVB-0025	GT28 "Plus" 2.5" Heavy Duty Stainless Steel
	GEO-GT2530-5B	GT28 "Default" & "Special" Gasket: 5 Bolt Exhaust Out - Stainless Steel
	FEO-5B-V2M	GT28 "Default" & "Special" 5 Bolt Flange Plate CNC Machined Solid Billet Mild Steel Grooved for 3" Oval Tube
	FEO-5B-V2S	GT28 "Default" & "Special" As Above - Stainless Steel
	FEO-5B-V2KM	GT28 "Default" & "Special" 5 Bolt to 3" V-Band Adaptor Kit Includes: Flange Plate, 3" Tube, 3" V-Band, Tig Welding Mating 3" V-Band Weld Ring - Mild Steel 3" V-Band Clamp - Stainless Steel Studs (5) Locking Nuts (5)
	FEO-5B-V2KS	GT28 "Default" & "Special" As Above with Mating V-Band Ring in Stainless Steel
Actuators & Wastegates
	ACT-050U	Universal Actuator Bracket CNC Machined 2 Bolt
	ACT-014U	Actuator for IWG Turbine Housing Default Spring: 14 PSI Click Here for Other Spring Options
	T-MV-R	Tial 44mm Wastegate Kit: Ultra Compact - 4.17" Tall Water-Cooled Option Included Default Red - .7 Bar (10.15 PSI) Click Here for More Options
Other Options
	PCC-001	Polished Compressor Cover
	ASCC-001	Anti-Surge Compressor Cover - Bullet Style Available Only on 4" Inlet Housing* No Actuator Supplied with this Cover*