Turbo Torque

Cheetah Stealth Series
NISSAN SR20DET
GT3076R TURBOCHARGER UPGRADE

 Cheetah SR20DET Stealth Series Upgrade

Warning - Please Read!

After fitting a higher flowing turbocharger it is crucial the vehicle be dyno-tuned by a mechanic who is experienced with tuning turbocharged vehicles BEFORE putting your foot into it no matter how tempted you are to give it a quick squirt!

Air fuel ratio, timing, fuel flow, fuel pressure, inlet manifold vs exhaust manifold pressures etc., all need to be checked. The mechanic should set the boost at a safe level & determine what if any modifications are required to further increase boost!

Failure to have your vehicle dyno-tuned after major component modifications will insure an engine & consequential turbocharger failure!!!

 

 

ACCELERATION!  MUSCLE!  STEALTH!
Cheetah SR20DET Stealth Series Upgrade



Features
  • Direct Bolt-On to Stock Location
  • Dual Ball Bearing
  • Modified GARRETT BB Turbocharger
  • Actuator NOT Included



Compressor   Turbine
Inducer Ø:

57.0mm

   Wheel Ø: 60.0mm
Exducer Ø: 76.2mm   Trim: 84
Trim: 56   A/R: 0.64 / 0.86
A/R: 0.60   Wastegated: Internal




Note


Actuator is not supplied with this unit, you can re-use the original actuator or select a higher pressure optional actuator & bracket below.
Highest Flowing SR20DET Internal Wastegate in our Range. The Factory Compressor Cover does not allow for Machining due to the Large Compressor Wheel therefore we utilised the GT28RS Cover with 3" Inlet & 2" Outlet. Modifications to the Inlet & Intercooler Piping will be required.

P/N: C-GT3076-SR20DET
 

Specify Turbine A/R


Free Delivery Australia Wide
Divider

RELATED ITEMS
 
Oil Supply Low Profile with Braided Lines
GT Oil Supply Line Kit H-OSB-314K
  • Low Profile Oil Supply Line Kit - 14" 
  
 
H-OSB-322K
  • Low Profile Oil Supply Line Kit - 22"
  
 
H-OSB-332K
  • Low Profile Oil Supply Line Kit - 32" 
  
 
H-OSB-348K 
  • Low Profile Oil Supply Line Kit - 48" 
  
 
Oil Drain
 GT28R Oil Drain Gasket GOD-GT2535-01 
  • Oil Drain Gasket
  • *Inc. with Turbo
  
Water In-Out Option for Braided Lines
Banjo Kit 14mm x 1.5 pitch FBK-M1410
  • Banjo Fitting Kit: Suits -6 AN Fitting
  • (1) Banjo Fiting 14mm Hole, -6 AN Male Flare
  • (1) Banjo Bolt, 14mm x 1.5 pitch
  • (2) Crush Washers
 

Exhaust In
GT25, GT28 Turbine Base Gasket GT258U-01
  • GT25, GT28 Undivided Base Gasket - Stainless Steel
  • *Inc. with Turbo
  
Exhaust Out Options
Gasket: Exhaust Out - GT25 to GT30 S/S GEO-GT2530-5B
  • Gasket: 5 Bolt Exhaust Out - Stainless Steel
  
Flange Exhaust Outlet GT25R-GT30R Twin Port FEO-5B -GT2530TP 
  • 5 Bolt Flange Plate
  • CNC Machined Solid Billet Stainless Steel ½" Thick
  • Twin Exit Ports: 2¼" & 1½" 
  
 Flange: Exhaust Out - 5 Bolt GT25-GT30 FEO-5B-V2M 
  • 5 Bolt Flange Plate
  • CNC Machined Solid Billet Mild Steel
  • Grooved for 3" Oval Tube
  
 Flange: Exhaust Out - 5 Bolt GT25-GT30 FEO-5B-V2S
  • As Above - Stainless Steel
  
Flange Exhaust Outlet 5 Bolt to 3" V-Band  FEO-5B-V2KM
  • 5 Bolt to 3" V-Band Adaptor: "Race"
  • Flange Plate, 3" Tube, 3" V-Band, Tig Welding
  • Mating 3" V-Band Weld Ring - Mild Steel 
  • 3" V-Band Clamp - Stainless Steel
  • Studs (5) Locking Nuts (5)
  
FEO-5B-V2KS
  • As Above with Mating V-Band Ring in Stainless Steel
  
Actuators
Universal Actuator Bracket  ACT-050U 
  • Universal Actuator Bracket
  • CNC Machined 2 Bolt 
  
 
Universal Actuator 14PSI ACT-014U
  • Actuator for IWG Turbine Housing
  • 12-14 PSI
  
 
Universal Actuator 14PSI ACT-022U
  • Actuator for IWG Turbine Housing
  • 20-22 PSI 
  
 
         
         
         
 
*Applicable Garrett Part Numbers 
 
700382-12, 700382-0012
Go to top